ReadyMadeRC
SUPER SKY SURFER 2000 PNP
| Material | EPO |
| Wingspan | 2000mm(78.74inch) |
| Flying Weight | 1500g（53oz） |
| Motor | 3536 1000KV Brushless |
| Servos | 4*17g servos |
| Propeller | 9x4(Three blade) |
| Battery | 11.1V ,3S 2200mAh-3300mAh recommended (not included) |
Technical Details:, , Includes:, , Requires:,
Another great option for RC and FPV flight! The Super ...ReadyMadeRC
FLIP FPV FRAME (BLACK)
| Size | Width 14.5" (375mm) Length 11" (280mm) |
| Diagonal Measurement (diagonally motor to motor) | 450mm |
| Motor Mount Measurements | from 15mm up to 28mm |
ReadyMadeRC
HOVERTHINGS FLIP FPV FRAME (BLACK/ORANGE)
| Size | Width 14.5" (375mm) Length 11" (280mm) |
| Diagonal Measurement (diagonally motor to motor) | 450mm |
ReadyMadeRC
DJI ZENMUSE H3-3D CUSTOMIZED FOR PHANTOM 2 ONLY
| PLEASE NOTE | This version is for the Phantom 2 only. |
| Static current | 400mA (@12V) |
| Dynamic current | 600mA (@12V) |
| Gimbal Input Power | 3S~6S (12V ~ 26V) |
| Operating Temperature | -10°C ~ 50°C |
| Gimbal Dimensions (With Damping Unit) | 97mm X 95mm X 73mm |
| GCU Weight | 22g |
| Tilt/Roll | ±0.02°? |
| Yaw | ±0.03° |
| Maximum Controlled Rotation Speed | Tilt axis |
Supported Camera:, GoPro3, GoPro3+ Black and Silver, GCU Input Power:, 3S~6S LiPo (12V~26V), Assistant Software System Requirement:, Windows XP SP3; Windows 7; Windows 8, Gimbal Weight:, 168g (camera excluded), GCU Dimensions:, 42 mm X 32 mm X 9.3 mm, : Tilt axis control: ?130 ~ +45°,
DO NOT BACK-ORDER Zenmuse H3-3D Features 3-axis high performance gimbal ...ReadyMadeRC
AIMDROIX ALUMINUM ARMS FOR DJI MULTIROTORS (BLACK)
| Motor mounting holes | 16mm to 25mm |
| Weight | 68 grams. (DJI Stock arms 54g) |
Features:, Stronger and stiffer than the stock plastic arms.,
50mm longer than stock plastic arms. Works as a heat ...ReadyMadeRC
AIMDROIX ALUMINUM EXTENDED ARM FOR DJI MULTIROTORS V1.5 (RED)
| Note | This listing is for a single arm ONLY |
| Motor mounting holes | 16mm to 25mm |
| Weight | 62 grams. (DJI Stock arms 54g) |
| http | //www.readymaderc.com/store/index.php?main_page=product_info& |
Features:, , : Users should verify that the motor mount screws don't go in too far into their motor since these arms are thinner than the stock arms!!!, : For larger diameter motors, when using the legs, you simply need to use these spacers:,
Please do not back order. V1.5 - Weight has been ...ReadyMadeRC
AIMDROIX ALUMINUM ARMS FOR DJI MULTIROTORS (HEX PACKAGE)
| HEX PACKAGE | Includes 2 RED and 4 BLACK arms |
| Motor mounting holes | 16mm to 25mm |
| Weight | 68 grams. (DJI Stock arms 54g) |
Features:, , Note: Users should verify that the motor mount screws don't go in too far into their motor since these arms are thinner than the stock arms.,
We are proud to be the official worldwide distributor of ...ReadyMadeRC
AIMDROIX ALUMINUM ARMS FOR DJI MULTIROTORS (QUAD PACKAGE)
| QUAD PACKAGE | Includes 2 RED and 2 BLACK arms |
| Motor mounting holes | 16mm to 25mm |
| Weight | 68 grams. (DJI Stock arms 54g) |
Features:, , Note: Users should verify that the motor mount screws don't go in too far into their motor since these arms are thinner than the stock arms.,
We are proud to be the official worldwide distributor of ...ReadyMadeRC
DJI A2 FLIGHT CONTROLLER SYSTEM AND DJI OSD MKII COMBO
| PLEASE NOTE | This includes qty 1 DJI A2 Multi Rotor Flight Controller AutoPilot System and qty 1 DJI iOSD MkII. |
| The A2 supports 9 types of traditional motor mixer | Quad I, Quad X |
ATTENTION: Despite claims by DJI and other resellers indicating this controller is for commercial use, be aware that it is not currently legal in the US to operate aircraft, even remote controlled like these, commercially without an appropriate FCC waiver or COA. These are sold for amateur use only., Different from other DJI flight controllers, the A2 offers a comprehensive online firmware upgrade ability: the Controller, IMU and GPS Pro, Receiver and Bluetooth LED indicator can be upgraded online through the assistant software separately. Lets you experience the latest technology comprehensively and quickly., It offers three types of control modes: GPS Mode (with GPS module), Atti. Mode, Manual Mode. The pilot can switch between the three modes to achieve different flight characteristics. The Flight controller can also adjust automatically within the changing flight environment and intelligently switch between GPS Mode and Atti. Mode to make sure the flight is safe. In manual mode position the operator can choose between manual and attitude. It also supports an RTH Switch from the Transmitter., Usually, the forward direction of a flying multi-rotor is the same as the nose direction. By using Intelligent Orientation Control (IOC), wherever the nose points, the forward direction has nothing to do with nose direction:, In course lock flying, the forward direction is the same as a recorded nose direction. See the following figures (Mode 2):, In home lock flying, the forward direction is the same as the direction from home point to the multi-rotor. See the following figures (Mode 2):, , A2 has a POI function: Point of Interest. When the GPS signal is good, users can record the current position of the aircraft as a point of interest by a preset switch on the remote controller. The aircraft can achieve a circling flight around the point of interest ,
A2 Multi-rotor Stabilization Controller DJI A2 multi-rotor stabilization controller is ...ReadyMadeRC
DJI A2 MULTI-ROTOR STABILIZATION CONTROLLER
| PLEASE NOTE | This includes qty 1 DJI A2 Multi Rotor Flight Controller AutoPilot System, does not include iOSD. |
| The A2 supports 9 types of traditional motor mixer | Quad I, Quad X |
ATTENTION: Despite claims by DJI and other resellers indicating this controller is for commercial use, be aware that it is not currently legal in the US to operate aircraft, even remote controlled like these, commercially without an appropriate FCC waiver or COA. These are sold for amateur use only., Different from other DJI flight controllers, the A2 offers a comprehensive online firmware upgrade ability: the Controller, IMU and GPS Pro, Receiver and Bluetooth LED indicator can be upgraded online through the assistant software separately. Lets you experience the latest technology comprehensively and quickly., It offers three types of control modes: GPS Mode (with GPS module), Atti. Mode, Manual Mode. The pilot can switch between the three modes to achieve different flight characteristics. The Flight controller can also adjust automatically within the changing flight environment and intelligently switch between GPS Mode and Atti. Mode to make sure the flight is safe. In manual mode position the operator can choose between manual and attitude. It also supports an RTH Switch from the Transmitter., Usually, the forward direction of a flying multi-rotor is the same as the nose direction. By using Intelligent Orientation Control (IOC), wherever the nose points, the forward direction has nothing to do with nose direction:, In course lock flying, the forward direction is the same as a recorded nose direction. See the following figures (Mode 2):, In home lock flying, the forward direction is the same as the direction from home point to the multi-rotor. See the following figures (Mode 2):, , A2 has a POI function: Point of Interest. When the GPS signal is good, users can record the current position of the aircraft as a point of interest by a preset switch on the remote controller. The aircraft can achieve a circling flight around the point of interest w,
A2 Multi-rotor Stabilization Controller DJI A2 multi-rotor stabilization controller is ...ReadyMadeRC
PARKFLYER SWITCH-MODE BEC 6V
| Input voltage | 8V to 33.6V (3s-8s lithium, up to 21 NiMHs) |
| Output current | 1.25A continuous, 1.5A 60 second peak (6 4-9g servos, 4 standard servos) |
| Weight | 6.5g/.23oz |
| Weight without wires | 4.4g/.16oz |
Weight:, 6.5g / 0.23oz, Model:, ParkBEC 6V, Specifications:, Applications:, Parkflyers,
(no wires) 4.4g / 0.16oz Product Description The ParkBEC 6V ...ReadyMadeRC
SWITCH-MODE SMART BEC WITH LITHIUM CUTOFF
| Input voltage | 9V to 33.6v (3s-8s lithium, up to 21 NiMHs) |
| Output current | 1.25A continuous, 1.5A 60 second peak. (6 4-9g servos, 4 17g or larger servos) |
| Cutoff voltage | 3.0v/Cell |
| Weight | 7.0g/.25oz |
| Weight Without Wires | 4.4g/.14oz |
Weight:, 7.0g / 0.25oz, Model:, SmartBEC, Specifications:, Applications:, Sport planes,
(no wires) 4.4g / 0.14oz Product Description The SmartBEC adds ...ReadyMadeRC
AIMDROIX ALUMINUM REPLACEMENT ARM FOR DJI MULTIROTORS (BLACK)
| Motor mounting holes | 16mm to 25mm |
| Weight | XX grams. (DJI Stock arms 54g) |
Features:, , Note: Users should verify that the motor mount screws don't go in too far into their motor since these arms are thinner than the stock arms.,
We are proud to be the official worldwide distributor of ...ReadyMadeRC
AIMDROIX ALUMINUM ARM FOR DJI V1.5 - (RED) (STOCK LENGTH)
| Motor mounting holes | 16mm to 25mm |
| Weight | 51 grams. (DJI Stock arms 54g) |
| http | //www.readymaderc.com/store/index.php?main_page=product_info& |
Features:, , : Users should verify that the motor mount screws don't go in too far into their motor since these arms are thinner than the stock arms!!!, : For larger diameter motors, when using the legs, you simply need to use these spacers:,
Please do not back order this item. We are proud ...ReadyMadeRC
AIMDROIX ALUMINUM ARMS FOR DJI MULTIROTORS-HEX PCKG STOCK LENGTH
| HEX PACKAGE | Includes 2 RED and 4 BLACK arms |
| Motor mounting holes | 16mm to 25mm |
| Weight | 51 grams (each arm). (DJI Stock arms 54g) |
| http | //www.readymaderc.com/store/index.php?main_page=product_info& |
Features:, , : Users should verify that the motor mount screws don't go in too far into their motor since these arms are thinner than the stock arms!!!, : For larger diameter motors, when using the legs, you simply need to use these spacers:,
We are proud to be the official worldwide distributor of ...